CATEGORIES
Are you interested in more information about this product or service? If so, please fill out the form below and representative will contact you.
23,300CPH chip (Laser centering/Optimum)
18,300CPH chip (Laser centering/ IPC9850)
One multi-nozzle laser head (6 nozzles)
From 0603(0201) to 33.5mm square components
|
JX-300 LED Catalogue Specification |
|||
|
Item |
JX-300 LED |
||
|
Board size |
standard specification | 50×50 ～1,200×360mm | |
| Longer sized PWB ※1 | 50×50 ～1,500×360mm | ||
|
Component height |
6mm/12mm |
||
|
Component size |
Laser recognition |
0603(0201) ～33.5mm |
|
|
Placement speed |
Optimum | 23,300CPH | |
| IPC9850 | 18,300CPH | ||
|
Placement accuracy |
±0.05mm(Cpk≧1) |
||
|
Feeder inputs |
Max.40 in case of 8mm tape |
||
|
Power supply |
200 to 415 VAC, 3-phase |
||
|
Apparent power |
3.0kVA |
||
|
Oparating air pressure |
0.5±0.05Mpa |
||
|
Air consumption |
345L/min(Opt.:Vacuum Pump 50L/min) |
||
|
Machine dimensions(W×D×H） ※2 |
1,920×1,393×1,440mm |
||
|
Mass(approximately) |
1,420kg |
||
|
※1 Long board support is optional. |
|||
|
※2 When equiped with the long board option, the machine width is 2,520mm. |
|||
|
JX-300LED Options |
|||
|
Recognition system |
HMS(Height Measurement System) / Bad mark reader |
||
|
Operation system |
Touch panel /HOD /Feeder position indicator |
||
|
Conveyor |
Applicability to long PWB(1,500mm) ※1 /IN・OUT buffer /Support table ※1 Automatic board width adjustment |
||
|
Electrical protection |
Ground-fault interrupter /UPS |
||
|
Others |
FCS calibration jig /Super foot /Caster /Vacuum Pump Solder lighting /Component quantity control |
||
|
Software |
EPU |
||
|
Component handling and feeders |
Tape feeder(8～72mm) /Bulk feeder /Stick feeder Matrix Tray Server TR5 ※2 /TR5S attachment kit ※2 /Tray station ※3 Trash box /Splicing jig /Tape reel mounting base /Feeder stocker Feeder Calibration Jig with Monitor |
||
|
※1 Check with factory for details. |
|||
|
※2 TR5S installation kit is required to use the TR5S matrix tray server. |
|||
|
※3 Tray station is required to use the tray holder on rear side. |
|||
|
※Please refer to the product specification for details. |
|||
ILIKELEO
Leopeng_keentec
sales@1clicksmt.com