● Effective Soldering max area: 180 x 235mm

● Rated power: 800W

● Process cycle: 1～8 min

● Temperature Range: 100℃-350℃

● Supply voltage: AC110V/50~60Hz or 220V/50~60Hz

● Size: 310×290×170mm

● Picking size: 360×230×360mm

● Net weight: 6.2kg

● Gross weight: 7.5kg

Perfect variety functions: return soldering, drying, heat preservation, finalize the design, fast cool off etc. It can be use to solder the most

smart small part example CHIP、SOP、PLCC、QFP、BGA etc; Can be used to the gum of the product solid turn, the circuit board is hot

aging, the PCB plank maintains to wait various works. Be applicable to each kind of business enterprise,company extensively develop and

the small batch quantity produce a demand.

A windowed drawer is designed to hold the work-piece. The faint ness controls a technique and can see the drawer type workbench, make whole soldering process at you of the under surveillance automatic completed. Adopted a high and dependable design, make what you see gratifying and rest assured.

Press “s” button, the main menu will appear on LCD.

Press “F4” to Select English Menu

In the main menu

Press “F3” button selection different temperature wave. Example select wave1

Press “F3” button again, can see parameter about you choose the temperature wave:  

Select: soldering paste sort, soldering temperature, time etc. example:

When selections are complete, then Press “F4” button to return previous page. Press the temperature wave that the”F1” key

carries out to make selection automatically.

When it is ending, the work will shut down automatically, and the warning buzzer is working.

In the main menu page, press “ F2”button by handcraft operation

Press “F1” button to start cooling, Press F1/S key again to stop. Press “F2” button to start heat up, Press F2/S key again to stop.

Wave Cycle Select：

1.Press the “S” button to select operational interface after switch on, press the “F4” to select a different language category.

2.Following we provide eight different waves, please choose one according to your request. Press the F1/F2 to choose different

wave, press F3 to look into different wave parameter, press 4 to confirm the wave you chose:

Wave one, use the same with 85Sn/15Pb 70 Sn/30Pb

Wave two, use the same with 63Sn/37Pb 60 Sn/40Pb

Wave three, use the same with Sn/Ag3.5; Sn/Cu 75 Sn/Ag4.0/Cu.5

Wave four, use the same with Sn/Ag2.5/Cu.8/Sb.5; Sn/Bi3.0/Ag3.0

Wave five, use the same with The red gum standard is solid to turn temperature wave,Heraeus PD955M.

Wave six & seven & eight, use the same with The PCB circuit board returns to fix etc.

Wave seven & eight, use the same with the wave cycle set-up by yourself.

Press F1/F2 button, ahead/ backwards select different time. Press F3/F4 button ,up/down to select different temperature,

Press “s” button to save.

When save finish, press “F4” button to select the temperature wave. Press “S” button to repetition.

Operating instructions:
1. Lightly puts the product which will be processed in the drawer of the oven on the stage , Close drawer, Press F1 to switch on,

    the automatic performance make selection of heat wave, Show current performance time, the enactment temperature and

    temperature on the LCD screen, and automatically note the formed wave of the temperature.

2. The whole process is in your supervision, you may see it by the window of the drawer, and you may see the data from the

    LCD screen. If the wave doesn't achieve your request, please modify the data by yourself.

3. The pre-set up wave cycle is according to the temperature that the different solder paste needs. You can pre-set up other wave

    cycle according to your needs.

4. In the process, you can press "S" to force to stop; When finished, the exhaust fan will work automatically to cool, you also can

    force to turn on the exhaust fan.

5. Complete the soldering, if somewhere is faulty, you can sold it automatically again, or you can sold it manual.

Operation Suggestions:

1. To satisfy the need of soldering both sides of the PCB, there is a particular designed fan duct in the machine. When the both

    sides of the PCB are of large difference in temperature, it can sold the patch in one side, and in the same time, it can keep

    another side of the PCB as well. To satisfy the soldering of the small board, please pre-put a PCB board in the size of 10cm*10cm,

    when soldering the small board and the solder-ball. It will make the soldering effect very well.

2. When use the machine, please pre-heat it if the environment is of low temperature, too humidity. The method: after choosing the

    wave cycle, run the machine with nothing in the drawer at the first time.

3. Attention: The machine can't be used to soldering the chips( the chips which with metal encapsulation are of strong glisten),and

    the "plastic plug in board" which can't be able to bear the temperature of 250 degree centigrade.

4. About the method to measure the temperature of the machine: Use the standard weatherglass. Fix the probe on the face of the

    PCB board(make sure it is the face ),then put the PCB board into the drawer, close the drawer. And then you will get the actual  

    temperature.

Maintenance:

a. Keep the inside of the machine clear. Please do as follows:
    When used the machine several times, please turn on the "heat-up" and the "exhaust fan" two or three minutes handly, to make the

    flux remained in the machine volatilization. It will keep the inside of the machine cleanness, and make the function of the machine

    stabilization.
b. Clean the drawer observation glass as necessary.

Warning !
1. Make sure the power supply is connect with earth.
2. Do not turn off the switch at once after using, make sure the machine is cooling, and then turnn off the switch and cut the power supply.
3. There isn't any way to do smoke evacuation, please put the machine in a ventilated condition to avoid poisoning

    (when the solder paste volatilization).
4. The insulations in the machine had been treated strictly. Do not take apart the machine until there is any safe protection.

● 1 X Fuse (10A)

● 1 X Power Line (We stock 110V-240V power version and US.UK.EU.AU. plugs for the country all over the world.)

● 1 X User Manual