CATEGORIES
Are you interested in more information about this product or service? If so, please fill out the form below and representative will contact you.
The soldering iron handles for general purposes are suitable for both SMD components and jobs with high power requirements (e.g. ground plane soldering).
For C245 Cartridge range |
The soldering iron handles for general purposes are suitable for both SMD components and jobs with high power requirements (e.g. ground plane soldering). |
 |
For C210 Cartridge range |
The T210 handles are suitable for precision soldering jobs with medium power requirements. Due to their size, they work with conventional and small SMDs as well as under a microscope. |
 |
For C470 & C245 Cartridge ranges |
For intensive soldering jobs requiring continued high thermal power. They feature good thermal insulation with a screw to fasten the cartridge which prevents rotation. |
 |
Nitrogen Handles features |
These are for working in an oxygen-free atmosphere providing better quality soldering. They offer extra heat to the solder joint and help prevent oxidation. The JBC GN-A Nitrogen Generator Module or an external nitrogen feed is needed at the operator’s bench. |
 |
Changing T210 & T245 Cartridges |
Save time and change cartridges safely without switching the station off. |
 |
Changing T470 Cartridges |
 |
Changing Nitrogen Cartridges |
 |
Maintenance |
● Before carrying out maintenance, always unplug the stand and the tool. |
● Check periodically that the metal parts of the tool and the stand are clean to ensure detection of the tool when it is in the stand. Use a damp cloth or alcohol. |
● Periodically check all cables and tubes connections. |
● Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only be performed by a JBC authorized technical service. |
Replacing grips |
Easily replace the Grips (Ref. 0016057 and Ref. 0018658) using the slide-on tabs. |
 |
Replacing Seals |
The Seal is meant to prevent undesirable flux vapors or particles from entering inside the tool. Its usage is highly recommended for intensive applications when soldering in exposed to FOD environments or for applications where the soldering iron works close to vertical position. |
 |
Accessories |
|
|
● Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. |
● The power cable must be plugged into approved bases. Make sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire. |
● Do not work on electrically live parts. |
● The tool should be placed in the stand when not in use in order to activate the sleep mode. The soldering tip, the metal part of the tool and the stand may still be hot after the station is turned off. Handle with care, including when adjusting the stand position. |
● Do not leave the appliance unattended when it is on. |
● Do not cover the ventilation grills. Heat can cause inflamable products to ignite. |
● Avoid flux coming into contact with skin or eyes to prevent irritation. |
● Be careful with the fumes produced when soldering. |
● Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm. |
● Utmost care must be taken with liquid tin waste which can cause burns. |
● This appliance can be used by children over the age of eight as well as persons with reduced physical, sensory or mental capabilities or lacking experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance. |
● Maintenance must not be carried out by children unless supervised. |
ILIKELEO
Leopeng_keentec
sales@1clicksmt.com