CATEGORIES
Are you interested in more information about this product or service? If so, please fill out the form below and representative will contact you.
L-352 is a 5 axis soldering robot with X,Y,Z,R,and solering wire feeding motion system+Inline transportation guide rail. It is equipped with 150W heating system ,soldering tip is easy to be exchanged with low cost. Self-developed software easy to operate .Inline design,can effectively connect with the production line,reduce product handling links.
| 1. The feeding conveyor, soldering part and discharging conveyor are independent belt lines, running from left to right, and the widening range is 50-350mm.Feeding conveyor length is 700mm. |
| 2. The soldering part , running from left to right, and the widening range is 50-350mm.The soldering part conveyor length is 500mm. |
| 3. Discharge conveyor , running from left to right, and the widening range is 50-350mm.The discharge conveyor length is 700mm. |
| Step1.Put the fixture with the product into the belt on the left side of the feeder to carry on the material (can also connect the front automatic SMT line by SMEMA), the distance between the two fixtures is not less than 50mm. The belt transport the fixture to the right to the soldering station. |
| When the sensor on the soldering part check there is a fixture.The cylinder on the conveyor start to work ,then the cylinder clamp the fixture.soldering robot start soldering the PCB. After the solder is completed, the cylinder release.The fixture is released to the discharging conveyor. |
| The discharge conveyor station is manually unloaded (also can be connected to the automatic SMT line by SMEMA) |
L-352 Inline Automatic Soldering Robot specification : | |
Model | L352 |
Device axis | 4 axis +1 PCS tin feeding+transportation guide rail |
The way to adjust the conveyor width | buy manual |
Equipment travel(X/Y/Z/R) | 350*350*80mm*360° |
Speed(X/Y/Z/R) | Max X/Y/Z:500mm/s,R:180°/S |
Conveyor height | 900±50mm |
Conveying width | 50-350mm |
Repeat positioning accuracy | ±0.06mm |
Equipment load | 3kg |
Program recording capability | 99 groups program |
Programming mothed | Teach panel |
Motor system | Stepper motor+Motion control card+Conveyor is PLC control |
Temperature range | 50℃-500℃ |
Send tin system | Independent driver+Stepper motor (Unbroke tin solder wire feeder) |
Moving direction | lift to right only |
Min solder wire feeding length | 0.1mm |
Application tin diameter | 0.8-1.2mm |
Inline SMEMA Auto Load Conveyor | Standard |
Power | 220V/50Hz |
Air pressure | 0.4-0.8Mpa |
Working environment | 0-40℃ |
Machine size | Approximate L1700*W800*H1800mm |
Machine weight | Approximate :200KG |
L-352 Inline Automatic Soldering Robot Standard configuration : |
Standard configuration: |
◎ 1 pcs inline automatic soldering robot (The whole part include two pcs conveyors+one pcs soldering part) |
◎ Solder tip 3pcs |
◎ 1pcs air pipe |
◎ 3pcs needles |
Optional configuration: |
◎ Customized fixture |
◎ Solder tip |
◎ 150W Heater |
ILIKELEO
Leopeng_keentec
sales@1clicksmt.com