CATEGORIES

You are here: SPI & X-Ray > X-Ray

All Products In Category:   XR6800 | MXC430 | CX-3000A | CX-3500

X-ray inspection system XR6800

Quick Overview

1. Japan Hamamatsu X-ray tube, the best closed type X-ray tube in the world, with more than 10000 hours lifetime, maintenance-free. 

2 New generation IRay 5” HD digital flat panel detector (FPD). 

3. FPD instead of the table can tilt 60°, won’t sacrifice magnification. 

4. Automatic navigation window, the table will move to where you click. 

5. 530*530mm table with 10KG load capacity. 

6. Speed adjustable 5 axis linkage system.

7. Can edit inspection procedures to achieve automated inspection in large quantities. 2.8. Easy to operate, can quickly find defects, only need 2 hours to train.

Working Principle

Working Principle


Our Advantages Features

●   Japan Hamamatsu X-ray tube, the best closed type X-ray tube in the world, with more than 10000 hours lifetime, maintenance-free.

●   New generation IRay 5” HD digital flat panel detector (FPD).

●   FPD instead of the table can tilt 60°, won’t sacrifice magnification.

●   Automatic navigation window, the table will move to where you click.

●   530*530mm table with 10KG load capacity.

●   Speed adjustable 5 axis linkage system.

●   Can edit inspection procedures to achieve automated inspection in large quantities.

●   Easy to operate, can quickly find defects, only need 2 hours to train.

Microfocus X-Ray Inspection System XR6800 Hardware Parameters:

  Model

   XR6800

  X-ray source

  Brand     Japan Hamamatsu
  Type   Closed, microfocus
  Max tube voltage   90kV
  Max tube current   200μm
  Focal spot size   5μm
  Function   Auto preheat

  Flat panel detector

  Brand   IRay
  Effective area   130mm*130mm
  Pixel size   85μm
  Resolution   1536*1536
  Frame rate   20fps
  Tiltable angle   60°

  Table

  Size   530mm*530mm
   Detectable area   500mm*500mm
  Max load   10kg

  Equipment

  Magnification   Geometry 200X   System 1500X
  Inspection speed   Max 3.0s/point
  Dimensions   1360mm (L) * 1365mm (W) * 1630mm (H)
  Weight   1350kg
  Power supply   AC110-220V 50/60HZ
  Max power   1500W
  Industrial PC   I3-7100 CPU, 4G RAM, 240GB SSD
  Displayer   24” HDMI LCD

  Safety

  Radiation leakage   No leakage, international standard: ≤1μSv/h.
  Lead glass observation window   Transparent lead glass window shields radiation to observe the inner status.
  Window and back door safety interlock     Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can’t turn on the X-ray.
  Electromagnetic safety switch   Lock once the X-ray is on, users can’t open the observation window.
  Emergency stop   Next to the operation position, press to power off.
  Tube protection   User can't leave the software to if you don't close the X-ray tube.

Microfocus X-Ray Inspection System XR6800 Software Function:

  Function module

  Operation   Keyboard and mouse can finish all operations
  X-ray tube control   Using mouse to click the X button can turn on or off the X-ray. The real-time tube voltage and current value will display beside, users can click up and down button, or drag the slider, or type to adjust.
  Status bar   Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green.
  Image effect adjustment   The brightness, contrast and gain of the image can be adjusted freely to achieve a satisfactory result.
  Product list   Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain, and can directly call the parameters when inspecting the same product, to improve the inspection efficiency.
  Navigation window   After the camera takes a photo of the table, click anywhere in the photo, the table will move to the place you click and display on the screen.
  Motion axis status   Display real-time coordinates.
  Inspection result   The measurement results (voids rate, distance, area, etc., set by users) display in order.
  Speed control   The movement speed of each axis can be adjusted to slow, normal and fast.

  Voids rate measurement

  Automatic calculation   Click on two points to determine a rectangle. The software automatically finds and measures the edge of the solder ball in the rectangle, the pad and the internal voids, and can get the data of the voids rate, the area of the solder ball, the circumference, the biggest void’s rate, the length and the width, and indicates NG or OK by red and green.
  Parameters adjustment   Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters to get accurate results of automatic calculation.
  Add voids manually   Users can draw a polygon or a free figure and calculate it as a void into the void rate.
  Save parameters   Users can save parameters such as grayscale threshold, pixel, contrast, size filtering and other parameters, and can directly call the parameters when detecting the same product, to improve the detection efficiency.

  Other measurement function

  Distance   Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
  Distance rate   It is mostly used to measure the soldering rate of the through-hole. Set one more point “D” than the distance. Divide the vertical distance from the D point to baseline by the vertical distance of the C point, to obtain the percentage ratio of the vertical distance of D to C.
  Angle   Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
  Radius   It is mostly used to measure round components such as solder balls. Click three points to determine a circle and measure the circumference, area and radius.
  Perimeter   It is mostly used to measure square components, click two points to determine a square, measure the length, width and area.

  Automatic inspection

  Manual setting   Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
  Array   For the regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
  Automatic identification   For inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image.

Application Example

Application-Example.jpg

Inquiry in X-ray inspection system XR6800
×
Product X-ray inspection system XR6800
Name
E-mail
Country
Phone
Other
Inquiry