CATEGORIES
Are you interested in more information about this product or service ? If so ,please fill out the form below and representative will contact you.
Programmable temperature and humidity chamber , also known as environmental chamber, it test the performance of heat , cold, dry, humidity resistance for material, it is suitable for test of electronic devices, instruments, plastic products, metal, food, chemical etc.
Programmable Temperature And Humidity Chamber THC Series Features: |
1.Professional temperature and humidity control software with profile record function, do not need additional profiler. |
2.Controller has Preventing electromagnetic interference function with SGS certificate. |
3. The refrigerant flow is controlled by servo control valve to save electricity 30%. |
4. Machine has Defrosting function(defrost every 800 cycle , defrosting 2 hours each time, integration test can reach 25% energy saving ) |
5.With vacuum glass observation window, directly monitor the test process effectively. |
6. Internal chamber is made of SUS 304 material. |
7. High quality parts ensures long service life of the machine ,such as TECUMSEH compressor,Danfoss heat exchanger, ABB breaker etc. |
Programmable Temperature And Humidity Chamber THC Series Test Standard: |
Meet test requirement as below : |
● GB/Bb T2423.2-89 high temperature test method. |
● GB2423.1-89 test A: low temperature test method 6. |
● GAb IEC60068-2-1 low temperature test method Ab. |
● GJB150.4-1986 test at low temperature. |
● EIA - 364-59 test at low temperature. |
● IEC60068-2-38 temperature cycle. |
● IEC60068-2-78 constant humidity and temperature. |
● IEC60068-2-30 temperature cycle. |
● EIA - 364-31C humidity resistance. |
● GB/T2423.3 humidity combined temperature cycle test. |
● MIL-STD-202G-103B humidity test. |
● GJB150.4-86 Environmental test methods for military equipment-low temperature test. |
● GJB150.3-86 Environmental test methods for military equipment-high temperature test. |
● GJB150.9-86 Environmental test methods for military equipment-humidity and temperature test. |
Programmable Temperature And Humidity Chamber THC Series Specification | ||||||
Model | THC-80 | THC-150 | THC-225 | THC-408 | THC-800 | THC-1000 |
WxHxD(cm)lnternal Dimensinos | 40x50x40 | 50x60x50 | 60x75x50 | 80x85x60 | 100x100x80 | 100x100x100 |
WxHxD(cm)External Dimensinos | 88x137x100 | 109x152x113 | 109x168x113 | 129x177x123 | 150x191x144 | 150x193x163 |
lnner chamber volume | 80L / 150L / 225L / 408L / 800L / 1000L | |||||
Temperature Range | -70℃～+150℃(B:-40℃,D:-70℃) | |||||
Humidity Range | 20%~98%R.H.(10%~98%R.H/5%~98%R.H R.H is a special optional condition ) | |||||
Display resolution/Unifoymity of temperature and humidity | ±0.1℃；±0.1%R.H./3.0℃; ±3.0%R.H | |||||
Temperature Rising/Falling Time | Approximate 4.0℃/minute/1.2℃/minute | |||||
lnner and Outer Materials | The inside case for SUS stainless steel mirror board,outside the box for iron plate | |||||
Insulation Materials | Resistant to high temperature,high density,formate chlorine,ethyl acetum foam insulation materials | |||||
Cooling System | Air.water cooling | |||||
Protection Devices | Fuse-free switch ,overloading protection switch for compressor,high and low coolant pressure protection switch,over-humidity and over-temperature protection switch,fuses,failure waming system | |||||
Accessories | watching window,50mm testing hole,PL internal bulbs partition plate,dry and wet ball gauze | |||||
Control panel | TH-900C | |||||
Compressor Brand | French Tecumseh | |||||
Power | 1Φ220VAC±10%50/60Hz﹠3Φ380VAC±10%50/60Hz | |||||
