CATEGORIES
Are you interested in more information about this product or service ? If so ,please fill out the form below and representative will contact you.
.jpg)
Semi-automatic Taping machine SAB-10 can be used for taping and coling various SMD parts.It has point actionsealing and horizonal press continuous sealing two models.Suitable for self-adhesive cover tape and hot sealing cover tape.The pull strength can be adjusted,temperature is stable.Adopting PLC control and touch screen to program.
| Frame Group is mainly used for the installation of pressure gauges, pressure regulator, supporting legs, tape releasing component, electrical control box and supporting the taping component on the table. Use an adjustable wrench to adjust the four foot nuts to make the rack panel on horizontal condition, as adjustment basis for the taping component. |
| Tape Releasing Installation is mainly used in clamping plastic tray to supply tape for taping component. |
| Tape Covering Component is mainly used for the clamping and releasing work of the sealed cover tape. The taping speed can be adjusted. |
| Tape Collecting Component is mainly used to collect the sealed carrier tape to be a roll of plastic reel. |
 | Taping Component is mainly used to count, inspect and seal (heat seal or cold seal) for the components artificially put into the carrier tape. |
 | Double-headed independent PID temperature control with an accurate and stable temperature control. Independent control of sealing pressure of the inside and outside blades to ensure that the tape would be balanced; |
 | Convenient Cover Tape Adjustment Adjust the tension of advancing cover tape; Fine turning the cover tape position; |
● Semi-automatic Taping machine SAB-10 can be used for taping and coling various SMD parts.
● It has point actionsealing and horizonal press continuous sealing two models.Suitable for self-adhesive cover tape and hot sealing cover tape.The pull strength can be adjusted.Taping speed can be adjusted.
● The packing process:Manual placing of material,auto sealing and auto rolling.
● Wide range using of equipment ,the track width(12~72mm) is adjustable.The depth of loaded cavity is 12mm.It can be hot-sealed or be self-sealed for all SMD elements.
● Adopting PLC controller ,temperature control is stable.Counting accurate.
● Touch screen programming interface,making the operate and program easy.
● Track of gripping cavity with a good control stability and easy adjustment;
● Be convenient to clamp all the EIA-481A standard qualified plastic reel and paper reel packed with carrier tape.
● Can be set before and after the empty lead and the actual number of loading; can also accurately set the number of each transfer and seal pressure reset pause reset time (0.1 ~ 99.9 seconds) .
Semi-automatic Taping Machine SAB-10 | |
Model | SAB-10 |
Applicable tape width: | 12-72mm of carrier tape width |
Machine Capacity | 2～6K pcs/h(based on the component figure and artificial feeding speed ) |
Reel Specification | single-phase: AC 220V f : 50HZ |
Power supply | 0.3~0.6Mpa/60L/Min |
Air pressure | 110℃-180℃ (according to the different requires of peel strength values); |
Start mode | Start button and foot switch |
Machine Dimension | Start button and foot switch |
Screw driving speed | L 2280*W620*H630mm |
Machine Net Weight | 40KG |
Standard parts:
◎ PLC+Touch screen
◎ PID Control
◎ Tape Collecting element
◎ Tape Releasing element
