● Soldering max area: 400×600mm

● Rated power: 2500W

● Process period: 1~8min

● Temperature Range: 100℃-350℃

● Supply voltage: AC110V/50~60Hz or 220V/50~60Hz

● Size: 684 x 504 x 225mm

● Picking size: 500×430×330mm

● Net weight: 27KG

● Gross weight: 35KG

 1.Select the wave:

The equipments install and adjusts to try: Place this machine in the well ventilated even on the stage, assure well ventilated fluency of machine, Can't have a combustible product, The drawer outwardly, Reserve the space that the drawer opens, The convenience operate, The machine around request about 20 mm for body heat loss; check the power supply if AC 220V or not,If right, put the power cable to connect the power supply,open the power on button,the LCD will light on the panel and go to main menu page. Press “F4” button, change to English Menu.In the main menu,Press “F3” button selection different temperature wave: example the wave one: Press “F3” button again, can see parameter about you choose the temperature wave: soldering paster sort. soldering temperature, time etc. example: Press “F4” button to return previous page, Press the temperature wave that the”F1” key carries out to make selection automatically, The work shuts down automatically after end,warning buzzer is working.In the main menu page,press “F2” button by handcraft operation.Press “F1” button to start cooling, Press F1/S key again to stop. Press “F2” button to strat heat up, Press F2/S key again to stop.

The wave select:

1.Press the “S”button selection operation interface after switch on, press the “F4” selections a different language category.

2.Process to request to set the wave comparison according to you to provide you with the reference.Press the F1/F2 choices different wave, there have 8 kinds of different temperature waves can provide you with the choice, press F3 to look into different wave parameter, press 4 confirm wave. Wave one, use the same with 85Sn/15Pb 70 Sn/30Pb Wave two, use the same with 63Sn/37Pb 60 Sn/40Pb Wave three, use the same with Sn/Ag3.5; Sn/Cu 75 Sn/Ag4.0/Cu.5 Wave four, use the same with Sn/Ag2.5/Cu.8/Sb.5; Sn/Bi3.0/Ag3.0 Wave five, use the same with The red gum standard is solid to turn temperature wave, Heraeus PD955M. Wave six,seven,egiht, use the same with The PCB circuit board returns to fix etc. Press “s” button to the temperature page, Press F1/F2 button, ahead/ backwards select different time. Press F3/F4 button, up/down to select different temperature, Press “s” button to save.When save finish, press F4 button to select the temperature wave. Press S button to repetition.

Operation suggestion:

1.The this aircraft for satisfies without the lead double-sided welding, the design has the unique air flue, for the guarantee platelet welding request, suggested when the welding platelet and BGA plant the tin ball, pulls out the base in the material to put in advance one 10x10cm PCB board, may cause the welding quality to be better. The operation suggests.

2. The ambient temperature is low when, the humidity or the humidity too are big, suggested before the welding wants preheating the machine. The operating procedure is: After chooses the welding curve, spatial machine returns automatically welds one time.

3. The this aircraft cannot weld the counter-optical too strong metal seal chip and the metal screening can; May not weld the withstanding temperature to be lower than 250 degree plastic plug-in units and the goods, asks respectfully the attention!

4. Customer examination machine temperature method: Uses the standard thermometer, outside will set at the temperature probe head fixedly 10x10cm PCB stiff surface, shuts tight certainly importantly in the PCB board above! Will fix has the temperature measurement probe head PCB board, puts in the material to pull out, thrusts in the machine, like this tests the temperature comparison conforms to the product production actual situation. There are eight kinds of temperature parameter waves provided for you to choose, you also can operate the machine with HM-Heating. And there is cooling fan with the machine. Whole soldering process will be complete automatically. It's very easy to operate.

Press “s” button, the main menu will appear on LCD.

Press “F4” to Select English Menu

In the main menu

Press “F3” button selection different temperature wave. Example select wave1

Press “F3” button again, can see parameter about you choose the temperature wave:

Select: soldering paste sort, soldering temperature, time etc. example:

When selections are complete, then Press “F4” button to return previous page. Press the temperature wave that the”F1” key carries out to make selection automatically.

When it is ending, the work will shut down automatically, and the warning buzzer is working.

In the main menu page, press “ F2”button by handcraft operation

Press “F1” button to start cooling, Press F1/S key again to stop. Press “F2” button to start heat up, Press F2/S key again to stop.

Wave Cycle Select:

1. Press the “S” button to select operational interface after switch on, press the “F4” to select a different language category.

2. Following we provide eight different waves, please choose one according to your request. Press the F1/F2 to choose different

wave, press F3 to look into different wave parameter, press 4 to confirm the wave you chose:

Wave one, use the same with 85Sn/15Pb 70 Sn/30Pb

Wave two, use the same with 63Sn/37Pb 60 Sn/40Pb

Wave three, use the same with Sn/Ag3.5; Sn/Cu 75 Sn/Ag4.0/Cu.5

Wave four, use the same with Sn/Ag2.5/Cu.8/Sb.5; Sn/Bi3.0/Ag3.0

Wave five, use the same with The red gum standard is solid to turn temperature wave, Heraeus PD955M.

Wave six & seven & eight, use the same with The PCB circuit board returns to fix etc.

Wave seven & eight, use the same with the wave cycle set-up by yourself.

Press F1/F2 button, ahead/ backwards select different time. Press F3/F4 button, up/down to select different temperature, Press “s” button to save.

When save finish, press “F4” button to select the temperature wave. Press “S” button to repetition.

Operating instructions:
1. Lightly puts the product which will be processed in the drawer of the oven on the stage, Close drawer, Press F1 to switch on, the automatic performance make selection of heat wave, Show current performance time, the enactment temperature and temperature on the LCD screen, and automatically note the formed wave of the temperature.

2. The whole process is in your supervision, you may see it by the window of the drawer, and you may see the data from the LCD screen. If the wave doesn't achieve your request, please modify the data by yourself.

3. The pre-set up wave cycle is according to the temperature that the different solder paste needs. You can pre-set up other wave cycle according to your needs.

4. In the process, you can press "S" to force to stop; When finished, the exhaust fan will work automatically to cool, you also can force to turn on the exhaust fan.

5. Complete the soldering, if somewhere is faulty, you can sold it automatically again, or you can sold it manual.

Operation Suggestions:

1. To satisfy the need of soldering both sides of the PCB, there is a particular designed fan duct in the machine. When the both sides of the PCB are of large difference in temperature, it can sold the patch in one side, and in the same time, it can keep another side of the PCB as well. To satisfy the soldering of the small board, please pre-put a PCB board in the size of 10cm*10cm, when soldering the small board and the solder-ball. It will make the soldering effect very well.

2. When use the machine, please pre-heat it if the environment is of low temperature, too humidity. The method: after choosing the wave cycle, run the machine with nothing in the drawer at the first time.

3. Attention: The machine can't be used to soldering the chips( the chips which with metal encapsulation are of strong glisten), and the "plastic plug in board" which can't be able to bear the temperature of 250 degree centigrade.

4. About the method to measure the temperature of the machine: Use the standard weatherglass. Fix the probe on the face of the PCB board(make sure it is the face ),then put the PCB board into the drawer, close the drawer. And then you will get the actual temperature.

Maintenance:

a. Keep the inside of the machine clear. Please do as follows: When used the machine several times, please turn on the "heat-up" and the "exhaust fan" two or three minutes handly, to make the flux remained in the machine volatilization. It will keep the inside of the machine cleanness, and make the function of the machine stabilization.
b. Clean the drawer observation glass as necessary.

Warning !
1. Make sure the power supply is connect with earth.
2. Do not turn off the switch at once after using, make sure the machine is cooling, and then turnn off the switch and cut the power supply.
3. There isn't any way to do smoke evacuation, please put the machine in a ventilated condition to avoid poisoning (when the solder paste volatilization).
4. The insulations in the machine had been treated strictly. Do not take apart the machine until there is any safe protection.

● 1 X Fuse (10A)

● 1 X Power Line (We stock 110V-240V power version and US.UK.EU.AU. plugs for the country all over the world.)

● 1 X User Manual