CATEGORIES
Are you interested in more information about this product or service? If so, please fill out the form below and representative will contact you.
SC-445 Selective Coating Machine adopt high precision servo driving system and high precison valve which provide a clean ,highly effecient coating process.High prescion valve can meet different coating demands. The tiltable device ensure no dead angle for coating .The maximum coating size can reach 400mm*450mm with SC-445.
| ● Streamline design of machine, open machine from front, easy to approach valve assemblings and conveyor system. |
| ● Close loop X,Y,Z R axis motion system, ball screw drive with rail & slider, make the valve assembly moving smooth. |
| ● Windows 7 based OS, full english software . Direct teach with valve , easy to operate. |
| ● CE ceritificated electrical parts and wiring , Reliable quality and durability. |
4 Axis Selective Coating Machine SC-445 Features: |
● 4 axis Selective Coating Machine adopt ball screw and dual linear guide rail, ensure smooth and low nosie movement, +/-90 degree rotable R axis with optional tilt device ensures no dead angle coating. |
● solid steel platform provide a stable base for machine, reduce vibration and enhance machine running life. |
● High precision servo motor and driving system make the position repeatibilty can reach 0.05mm, high speed response and movement. |
● High precision valve can meet different coating demands. |
● Equipped with motorized width adjustment mechanism. |
● Optional glue weighing system can avoid missing coating. |
● Air pressure detector is standard configuration for safety and ensures coating quality. |
● Equipped with UV lamp for coating detection. |
● Industrial PC ,windows operation system , full english interface ,very easy to use. . |
Selective Coating Machine SC-445 specification: | |
Model | SC-445 |
Work Area | L400mm*W450mm |
Axis number | X,Y,Z ,R axis(+/-90 degree rotable ) |
Max Work Movement Speed | Max 800mm/s |
Standard Valve | Narrow spray valve, needle valve |
Valve tilting device | narrow spray valve and needle spray valve with tilt angle 35° |
Optional valve | Film coating valve |
Max PCB Component Height | 70mm |
Programming | teaching by valve |
Repeatable Accuracy | +/- 0.05mm |
Conveyor Height | 920mm±20mm |
Conveyor direction | only left to right |
Conveyor Speed | 0~3M/min |
Width adjustment | motorized width adjustment |
Operation system | English Windows 7 |
Glue Tank | 10L glue tank *1set , 2L cleaning tank * 1set |
Power Supply | AC220V 50Hz,1P |
Total Power | 2 KW |
Air Requirement | 0.5-0.7Mpa |
Overall Size W*D*H | L1270mm*W1630mm*H1750mm |
Weight | 535KG |
Needle Dispensing valve | Needle Dispensing valve is applied to areas where: 1. components are close to keep-out areas. 2. tall component require support. 3. extra glue is required. 4. glue is needed on the edge or under a component. |
| |
● Dispensing line width:min. 2mm ● Air pressure: 0.1-0.4Mpa ● Applied to max viscosity of the glue ：1000cps | |
Narrow spray valve | ● Coating thickness can be adjusted by changing air pressure and moving speed. ● Coating width can be adjusted by changing air pressure. ● Narrow spray valve is applied to areas where: 1.most of coating. |
| |
● Spraying swath: 6-10mm ● edge definition : 1mm ● Valve stoke : 0.01mm-5mm ● Air pressure: 0.2-0.4Mpa ● Applied to max viscosity of the glue ：1000cps | |
Wide spray valve | ● big spray swath ,high efficiency .Coating thickness can be adjusted by changing air pressure and moving speed. ● Coating width cand be adjusted by changing air pressure. ● wide spray valve is applied to areas where: 1.large coating area without barrier. |
| |
● Spraying swath: 15-30mm ● edge definition : 3mm ● Air pressure: 0.1-0.4Mpa ● Applied to max viscosity of the glue ：1000cps | |
Selective Coating Machine Valve specification | |||
Valve parameter | Needle valve | Narrow spray valve | Wide spray valve |
spraying swath | min dot size :2mm | 6-10mm | 15-30mm |
air pressure | 0.2-0.4Mpa | 0.2-0.4Mpa | 0.2-0.4Mpa |
applied to max glue viscosity | 1000 cps | 1000 cps | 1000 cps |
edge definition | / | 1mm | 3 mm |
applied to | 1.components are close to keep-out areas. | 1.atomazation film can be adjusted by air pressure and moving speed, applied to most of product. | 1. big spray swath, highefficiency, applied to large coating area without barrier. |
2. tall component require support. | |||
3. extra glue is required. | |||
4. glue is needed on the edge or under a component. | |||
Standard configuration | |
● X/Y/Z/R 4 Axis Selective Coating Machine. | |
● Industrial PC ,monitor, Keyboard,mouse. | |
● 4 aix driving system. | |
● Alarm light. | |
● Narrow spray valve with tilting device *1set | |
● Needle valve with tilting device *1set. | |
● Motorized width adjustment system. | |
● 10L pressure tank *1set. | |
● 2L cleaning tank *1set. | |
● Ultraviolet inspection lamp | |
● 1 year parts warranty. | |
Optional configuration: | |
● Film coating valve | 1set |
● Glue weighing system for empty glue tank detection | 1set |
● PCB clamping system | 1set |
● 10L pressure tank (for B glue tank) | 1set |
● Customized power supply 1PH, 110V/60HZ | 1set |
ILIKELEO
Leopeng_keentec
sales@1clicksmt.com