CATEGORIES

You are here: SOLDERING ROBOT > Cost Effective Solution

All Products In Category:   L-352 | L331 | L332

L-352 Inline Automatic Soldering Robot

Quick Overview

L-352 is a 5 axis  soldering robot  with X,Y,Z,R,and solering wire feeding motion system+Inline transportation guide rail. It is equipped with 150W  heating system ,soldering tip is easy to be exchanged with low cost. Self-developed software easy to operate .Inline design,can effectively connect with the production line,reduce product handling links.

1. The feeding conveyor, soldering part and discharging conveyor are independent belt lines, running from left to right, and the widening range is 50-350mm.

1. The feeding conveyor, soldering part and discharging conveyor are independent belt lines, running from left to right, and the widening range is 50-350mm.Feeding conveyor length is 700mm.

 

2. The soldering part , running from left to right, and the widening range is 50-350mm.

2. The soldering part , running from left to right, and the widening range is 50-350mm.The soldering part conveyor length is 500mm.

 

3. Discharge conveyor , running from left to right, and the widening range is 50-350mm.The discharge conveyor length is 700mm.

3. Discharge conveyor , running from left to right, and the widening range is 50-350mm.The discharge conveyor length is 700mm.

 

Step1.Put the fixture with the product into the belt on the left side of the feeder to carry on the material (can also connect the front automatic SMT line by SMEMA), the distance between the two fixtures is not less than 50mm.

Step1.Put the fixture with the product into the belt on the left side of the feeder to carry on the material (can also connect the front automatic SMT line by SMEMA), the distance between the two fixtures is not less than 50mm. The belt transport the fixture to the right to the soldering station.

 

When the sensor on  the soldering part check there is a  fixture.

When the sensor on  the soldering part check there is a  fixture.The cylinder on the conveyor start to work ,then the cylinder clamp the fixture.soldering robot start soldering the PCB. After the solder is completed, the cylinder release.The fixture is released to the discharging conveyor.

 

The discharge conveyor station is manually unloaded (also can be connected to the automatic SMT line  by SMEMA)

The discharge conveyor station is manually unloaded (also can be connected to the automatic SMT line  by SMEMA)

L-352 Inline Automatic Soldering Robot specification :

  Model

  L352

  Device axis

  4 axis +1 PCS tin feeding+transportation guide rail  

  The way to adjust the conveyor width

  buy manual  

  Equipment travel(X/Y/Z/R)

  350*350*80mm*360°

  Speed(X/Y/Z/R)

  Max X/Y/Z:500mm/s,R:180°/S

  Conveyor height

  900±50mm

  Conveying width

  50-350mm  

  Repeat positioning accuracy

  ±0.06mm

  Equipment load

  3kg

  Program recording capability

  99 groups program

  Programming mothed

  Teach panel

  Motor system

  Stepper motor+Motion control card+Conveyor is PLC control

  Temperature range

  50℃-500℃

  Send tin system

  Independent driver+Stepper motor (Unbroke tin solder wire feeder)

  Moving direction

  lift to right only

  Min solder wire feeding length  

  0.1mm

  Application tin diameter

 0.8-1.2mm

  Inline SMEMA Auto Load Conveyor

  Standard

  Power

  220V/50Hz

  Air pressure

  0.4-0.8Mpa

  Working environment

  0-40℃

  Machine size

  Approximate L1700*W800*H1800mm

  Machine weight

 Approximate :200KG

L-352 Inline Automatic Soldering Robot Standard configuration :

Standard configuration:

◎ 1 pcs inline automatic soldering robot (The whole part include two pcs conveyors+one pcs soldering part)

◎ Solder tip 3pcs

◎ 1pcs air pipe

◎ 3pcs needles

Optional configuration:  

◎ Customized  fixture

◎ Solder tip

◎ 150W Heater

Inquiry in L-352 Inline Automatic Soldering Robot
×
Product L-352 Inline Automatic Soldering Robot
Name
E-mail
Country
Phone
Other
Inquiry